Fabric switch

Z9264F-ON

High-performance, high-density open networking 100 GbE multi rate aggregation switch

Close

Z9264F-ON

Key features
• 2RU high-density 40/100GbE aggregation switch with up to 64 ports of 40/100GbE (QSFP28) or up to 128 ports of 10/25/40/50GbE ports (using breakout cable)
• Multi-rate 100GbE ports support 10/25/40/50/100GbE. 40GbE ports support 10/40GbE
• Scalable L2 and L3 Ethernet switching with QoS and a full complement of standards-based IPv4 and IPv6 features, including OSPF and BGP routing support
• 6.4Tbps non-blocking, switching fabric delivers line-rate performance under full load on Z9264F-ON
• L2 multipath support via Virtual Link Trunking (VLT) and Routed VLT support
• VXLAN gateway functionality support for bridging and routing the non-virtualized and the virtualized overlay networks with line rate performance (hardware only)
• Support for OS10 Enterprise Edition
• Converged network support for DCB, with priority flow control (802.1Qbb), ETS (802.1Qaz), DCBx and iSCSI TLV support
• Z9264F-ON supports Routable RoCE to enable convergence of compute and storage on Active Fabric
• IO panel to PSU airflow or PSU to IO panel airflow Redundant, hot-swappable power supplies and fans
• Supports the open source Open Network Install Environment (ONIE) for zero touch installation of alternate network operating systems
• L2, L3, RIOT VXLAN Gateway support (hardware only)
• Tool-less enterprise ReadyRails™ mounting kits reducing time and resources for switch rack installation
• Power-efficient operation up to 45°C helping reduce cooling costs in temperature-constrained deployments

Z9100-ON

High-performance 10/25/40/50/100GbE fixed port, multi-rate, fabric, open networking switch

Close

Z9100-ON

  • 32xQSFP28 ports enabling cost effective 10/25/40/50/100GbE multi-rate port switching
  • 1RU high-density 10/25/40/50/100GbE fixed form factor switch with choice of up to 32 ports of 100GbE, 64 ports of 50GbE, 32 ports of 40GbE, 128 ports of 25GbE or 128 ports of 10GbE plus 2 ports 1/10GbE SFP+
  • Up to 6.4Tbps of switching I/O bandwidth (full duplex) available and non-blocking cut-through switching fabric delivering line-rate performance under full load with sub usec latency
  • Scalable L2 and L3 Ethernet switching with QoS and a full complement of standards-based IPv4 and IPv6 features, including OSPF and BGP routing support
  • L2 multipath support via Virtual Link Trunking (VLT) and multiple VLT (mVLT) multi-chassis link aggregation technology
  • VRF-lite enables sharing of networking infrastructure and provides L3 traffic isolation across tenants
  • Open Automation Framework adding automated configuration and provisioning capabilities to simplify the management of network environments
  • Jumbo frame support for large data transfers
  • 128 link aggregation groups with up to eight members per group, using enhanced hashing
  • Redundant, hot-swappable power supplies and fans
  • I/O panel to power supply airflow or power supply to I/O panel airflow
  • Tool-less enterprise ReadyRails™ mounting kits reducing time and resources for switch rack installation
  • Power-efficient operation up to 45°C helping reduce cooling costs in temperature-constrained deployments
Tech Specs
Dell Networking Z-Series Core and Aggregation Switches
Dell Networking Z9100

100 Gigabit Ethernet QSFP28 ports

32

Size

1 RU, 1.75"h x 17.08"w x 18.11 d
(4.4 h x 43.4 w x 46 cm d)

Weight

20.1 lbs (9.12 kg) includes power supplies

Environmental

Dell Networking Z9100

Operating temperature

32°F to 113°F
(0°C to 45°C)

Operating humidity

10 to 90% (RH), non-condensing

Power

Dell Networking Z9100

Power supply

100-240V AC 50/60 Hz

Max. power consumption

750 Watts

Close
OK

Cookies on our site: We use cookies to provide you with the best experience on our site. Use of this website signals your consent to use cookies. Learn more about cookies